Treck Releases High Performance TCP/IP Demo for Xilinx Spartan-6 FPGA Embedded Platform

CINCINNATI, OH (February 8, 2010) - Treck, a leading provider of embedded Internet protocols, has announced the availability of their new high performance networking reference design for the Xilinx Spartan®-6 FPGA Embedded Platform that includes the SP605 board. The new MicroBlazeT soft processor-based implementation of the Treck TCP/IP stack achieves upwards of 475 Mbps TCP payload throughput on a Gigabit Ethernet link. This performance is facilitated by zero-copy Treck stack implementation and the Spartan-6 FPGA which includes a hard memory controller that supports DDR3 memory interface at 800Mbps.

Treck provides demos including support for using the Treck TCP/IP stack in both standalone mode and in a multi-threaded environment with XilKernel. The demo software suite includes UDP throughput testing and examples of Treck's HTTP server, FTP server, Telnet server, and SNMP agent demo.

"Treck's high performance and reliable TCP/IP protocol stack allows our customers to fully utilize the Tri-Mode Ethernet MAC IP and hardware capacity present in Xilinx FPGAs. If you are looking for a TCP/IP stack to maximize your network throughput, Treck TCP/IP is a good fit." says Brent Przybus, Director of Platform Marketing at Xilinx.

For more information and a link to download the demo, please visit:

Treck TCP/IP Version 6.0 Released (February 2010)

CINCINNATI, OH (February 8, 2010) - Treck Incorporated, a leading provider of embedded Internet protocols, announced today the general availability of Treck TCP/IP version 6.0. The latest version of the industry-leading communications software provides numerous upgrades that increase versatility, performance, and ease of use. In addition to its existing robust feature set, Treck TCP/IP now offers support for 64-bit processors, the ability to manage over 64,000 concurrent connections, reduced memory footprint, and the ability to un-initialize the entire protocol stack freeing all global variables and system resources,

Included in Treck 6.0 is full support for several new RFCs including:

• RFC 3484: Default Address Selection for Internet Protocol version 6 (IPv6)
• RFC 3736: Stateless Dynamic Host Configuration Protocol (DHCP) Service for IPv6
• RFC 4443: Internet Control Message Protocol (ICMPv6) for the Internet Protocol Version 6 (IPv6) Specification

Treck Releases High Performance TCP/IP Demo for Xilinx ML507

CINCINNATI, OH (October, 26 2009) - Treck, a leading provider of embedded Internet protocols, has announced the availability of their new high performance demo for PowerPC 440 on Xilinx Virtex 5 FPGAs using a Xilinx ML507 evaluation board. The new demo is based on the Xilinx Application Note xapp1043. Like xapp1043, the new demo features Treck's ability to achieve near line-rate throughput with TCP/IP on a Gigabit Ethernet link. The demo has also added support for using the Treck TCP/IP stack in a multi-threaded environment with XilKernel. Even with the added overhead of XilKernel, the Treck TCP/IP stack is capable of delivering near line-rate TCP throughput of 938 Mbps with standard 1500 byte Ethernet frames and 990 Mbps with 9000 byte Jumbo Ethernet frames. The demo also includes UDP throughput testing and examples of several of Treck's upper layer protocols: HTTP server, FTP server, Telnet server, and SNMP agent demo. For more information and a link to download the demo, please visit:

Treck TCP/IP Version 5.0 Released (June 2008)

New Product:
•IGMPv3: For more information please see the IGMPv3 documentation

New Treck TCP/IP Features:
•Improved socket lookup and random port insertion speeds
•Timer modifications to ease the load of the tfTimerExecute thread
•Added pause, resume, and reset functionality to TCP retransmission timers on a per-socket basis

DHCPv6 Enhancements
•Added support for DHCPv6 authentication

Crypto Library Enhancements
•Added support for SHA-256

Click here for a complete list of changes

Treck TCP/IP Version 4.5 Released (December 2006)
Some new features include:

IKE
•Added IKE Policy Support
•Added NAT-T support
•Added DPD support
•Added support for IKE as a separate task

IPsec
•Added support for IPsec as a separate task

IPsec Policy Enhancements
•Added IP Compression negotiation support

IKE & IPsec Changes
•Added IKE & IPsec priority processing
•Several Security Protocol Enhancements
•Added Security Statistics

IKE, IPsec, & SSL
•Asynchronous Crypto Processing

BOOTP & DHCP
•Added support for setting and retrieving DHCP & BOOTP options not recognized by Treck
•Added support for setting the hostname option with BOOTP
•Added API tfFinishConfigInterface()
•Added support for switching from BOOTP to DHCP (or vice versa) without having to close the interface
•Added BOOTP user interface similar to the DHCP user interface

Click here for a complete list of changes

Treck Partners with Xilinx for Gigabit TCP Performance

Click here for more information.

Treck and Freescale Partner for Performance Advantage on Coldfire Processors

Click here for more information.

Treck TCP/IP Version 4.2 Released (Feburary 2006) Some new features include:

• Added Universal Plug and Plug to optional protocols
• Added PPP over Ethernet to optional protocols
• Added DHCPv6
• Several new API’s have been added for the Treck Web Server
• Added FTP over SSL

Click here for a complete list of changes

Treck Dual Protocol Stack Receives IPv6 Ready Phase 2 Approval (June 20, 2005)

Click here for more information.

Treck Releases Universal Plug and Play SDK for Embedded Devices (Feburary 18, 2005)

Click here for more information.

Treck Technology Powers KADAK's KwikNet® TCP/IP Stack (October 2, 2004)

Click here for more information.

Treck Releases Version 4.0 of their award winning IPv4/IPv6 Protocol Stack (Feburary 27, 2004)

Click here for more information.

Treck's TCP/IP Ported to DM642 (June 26, 2003)

Click here for more information.